Sandwich System, Impermeablecombines Base Mat with Poured-in-Place Polyurethane Running Track
The same raw materials can be produced with different hardness by adjusting the A/B/C component ratio, and the raw materials need not be replaced in the hardness switching process.
Product Introduction
Our company has established a comprehensive quality control system, and the PTMEG Type MDI System Polyurethane Elastomer, Casting Polyurethane Prepolymer, Polyether Based Casting Polyurethane Prepolymer are absolutely guaranteed. We strive to build a learning-oriented enterprise and promote the comprehensive and coordinated development of the enterprise and employees. Our company has many years of international and domestic marketing experience and knowledge. After a relatively short period of development, our company's products have covered almost all types and specifications of current industry.
Three componment MDI system PU Prepolymer
1. Characteristics of MDI raw materials
The same raw materials can be produced with different hardness by adjusting the A/B/C component ratio, and the raw materials need not be replaced in the hardness switching process.
1) Need catalyst intervention
MDI three-component feedstock belongs to semi-prepolymer, and the reaction rate of-0H is less than that of-NH2. In order to obtain better physical properties and production efficiency, catalyst is needed
2) Environmental protection
The vapor pressure of MDI is much lower than that of TDI, and it has aromatic odor and little toxicity in the production process, so MDI is a new material that meets the needs of environmental protection.
2. Advantages of the MDI three-component series
* Adjustable hardness: the same grade of three-component raw materials can be replaced by permutation and combination to produce products with different hardness.
* Environmental protection: MDI vapor pressure is lower.
* Low equipment energy consumption: The application temperature of MDI products is lower, and the equipment energy consumption is greatly reduced.
* High production efficiency: The intervention of the catalyst makes the production efficiency of MDI products higher than that of TDI products, with low energy consumption and high efficiency.
Specifications
Item | Standard | Unit | Hardness | |||||||
60A | 65A | 70A | 75A | 80A | 85A | 90A | 95A | |||
HJ33M-A | - | g | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
HJ33M-B | - | g | 224 | 184 | 144 | 124 | 104 | 84 | 69 | 56 |
HJ33M-C | - | g | 7.25 | 9.05 | 10.85 | 11.75 | 12.65 | 13.55 | 14.20 | 14.80 |
Catalyst | - | ‰ | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 |
HJ33M-A temperature | - | ℃ | 45-50 | |||||||
HJ33M-B temperature | - | ℃ | 65-75 | |||||||
HJ33M-C temperature | - | ℃ | 35-40 | |||||||
Die temperature | - | ℃ | 100-110 | |||||||
Post-maturing conditions | - | h/℃ | (12-24)/100 according to product size | |||||||
Gel time | - | mins | 7~10 | 7~10 | 7~10 | 5~7 | 5~7 | 3~5 | 3~5 | 3~5 |
Demoulding time | - | mins | 40 | 40 | 40 | 30 | 30 | 30 | 30 | 30 |
Tensile strength | GB/T528-2009 | Mpa | 35-37 | 36-38 | 36-38 | 38-40 | 38-43 | 42-47 | 43-48 | 47-52 |
100% modulus | GB/T528-2009 | Mpa | 1—2 | 2—3 | 2—3 | 2—4 | 3—5 | 5—7 | 6—8 | 8—10 |
300% modulus | GB/T528-2009 | Mpa | 2—4 | 5—8 | 7—9 | 9—12 | 11—14 | 13—16 | 14—17 | 17—20 |
Elongation at break | GB/T528-2009 | % | 551-654 | 532-637 | 522-625 | 522-623 | 481-582 | 432-535 | 422-525 | 425-527 |
Tear strength | GB/T529-2008 | KN/m | 36-44 | 42-54 | 52-63 | 61-73 | 71-82 | 81-92 | 92-104 | 104-120 |
Rebound | GB/T1681-2009 | % | 51-52 | 50-52 | 50-52 | 49-51 | 48-50 | 45-47 | 43-45 | 41-43 |
Density (25 ℃) | GB/T533-2008 | g/cm2 | 1.21 | 1.21 | 1.22 | 1.22 | 1.22 | 1.23 | 1.24 | 1.24 |
DIN drum wear | GB/T9867-2008 | mm3 | ≤40 | ≤40 | ≤38 | ≤38 | ≤38 | ≤38 | ≤35 | ≤35 |
In striving to delight our customers every time, we always want to exceed their expectations and consistently provide them with quality Sandwich System, Impermeablecombines Base Mat with Poured-in-Place Polyurethane Running Track and services that offer value for money. We are developing and growing in the market with the corporate ethics of "integrity, quality and transcendence". We have won the recognition of many international companies and established long-term cooperative relationships with our unparalleled commitment to quality first.
Hot Tags: three componment mdi system casting polyurethane, China, manufacturers, factory, buy, MDI System Casting Polyurethane Elastomer, Two Componment MDI Based Polyurethane Prepolyer, Cold Casting Polyurethane Prepolyer, Casting Polyurethane Prepolymer, PU Elastomer Finished Product, PTMEG Type MDI System Polyurethane Elastomer
[[ProKeywords]]
