News

Choosing The Right Polyurethane Seal: Polyether Vs. Polyester For Hydraulic A...

In simple terms, when used for sealing rings, the core advantages of polyether-based polyurethane lie in its hydrolysis resistance and low friction, resulting in a longer service life. In contrast,...

Effect Of Hardness Tolerance Of Wear-Resistant Polyurethane Products On Machi...

Problems encountered during machining when the hardness tolerance range is too large. 1. Poor surface quality (roughness, waviness, orange peel) · In areas with high hardness, cutting resist...

What Is A PU Polyurethane Cleaning Ball?

A PU Polyurethane Cleaning Ball (also known as a screen bouncing ball or self-cleaning ball) is a spherical elastomer component placed between the screen deck and bottom panel of a vibrating screen...

How Does The Shrinkage Rate Of Polyurethane Prepolymer Change?

Polyurethane prepolymer will decrease with the increase of environmental temperature; it will fluctuate with the increase of environmental humidity.

Density Calculation Method Of Polyurethane Prepolymer

With the increasing demand and types of polyurethane prepolymers in my country, the output of polyurethane prepolymers has increased rapidly.

Precautions For The Use Of Polyurethane Prepolymer

Polyurethane prepolymer is a kind of polyurethane prepolymer based on TDI and polyether polyol. It has the characteristics of high elasticity, good abrasion resistance, low endogenous heat, and hyd...

Definition Of Polyurethane Prepolymer

Polyurethane prepolymer is a high molecular polymer formed by the reaction of polyisocyanate and polyether or polyester polyol under certain conditions.

Shrinkage Rate Of Polyurethane Prepolymer

In order to better use polyurethane prepolymer, in addition to some basic characteristics, we also need to know its shrinkage rate.

Method Of Eliminating Air Bubbles By Polyurethane Prepolymer

In the defoaming of prepolymer adhesives, 13X activated zeolite molecular sieve is often used, and its activation temperature is 200-350°C.

Bubble Formation And Elimination Method When Using Polyurethane Prepolymer

Note that in the synthesis of transparent polyurethane prepolymer adhesives, the moisture content of all raw materials must reach the polyurethane level (<0, 02%).

Polyurethane Prepolymer

In the case of time production, the appearance of bubbles sometimes does not mean that this is a good thing.

Why Is The Cup Test Required For The Production Of Polyurethane Prepolymer Pr...

When the ratio of A and B materials is out of balance, the tear strength of free foam materials is particularly easy to observe.