Products

Wholesale Factory Price Mdi Tdi Based-System Elastomer Casting Machine

The same raw materials can be produced with different hardness by adjusting the A/B/C component ratio, and the raw materials need not be replaced in the hardness switching process.

Send Inquiry

Product Introduction

We will continue to maintain our leading position and continue to increase our brand impact by offering a diverse range of MDI System Casting Polyurethane Elastomer, 3 5 Crystal Water Zinc Borate, Anhydrous Zinc Borate with a high degree of practicality. Our quality service tenet is: Your satisfaction is our pursuit! Our company's various products are famous for their perfect details, which can meet the needs of domestic and foreign markets at the same time. Following the principle of scientific standardization is an important premise for us to do a good job in all business management.

Quazi MDI Three componment casting PU

1. Characteristics of MDI raw materials

The same raw materials can be produced with different hardness by adjusting the A/B/C component ratio, and the raw materials need not be replaced in the hardness switching process.Because MDI has excellent symmetry and two benzene rings in molecular structure, MDI products can endow products with better comprehensive physical properties. At the same time, because of chemical reaction factors, the product characteristics are also different from TDI.

(1) Higher resiliency

(2) Higher shrinkage rate

(3) Aging resistance and improved color stability

(4) Decreasd temperature resistance

2. MDI three-component feedstock belongs to semi-prepolymer, and the reaction rate of-0H is less than that of-NH2. In order to obtain better physical properties and production efficiency, catalyst is needed.

3. Environmental protection

The vapor pressure of MDI is much lower than that of TDI, and it has aromatic odor and little toxicity in the production process, so MDI is a new material that meets the needs of environmental protection.

4. Storage conditions of raw materials

Storage requirements	Raw materials	Time	Storage condition	Shelf life
	HJ33M-A	May 1-October 1 (spring and summer)	Below 30 ℃, keep away from light and dry, and it is recommended to store it in cold storage	6 months after receipt > 30 ℃ storage time < 1 month
	HJ33M-A	October 1-May 1 (autumn and winter)	Under 30 ℃, keep away from light and dry, without other special requirements	6 months after receipt of the goods
	HJ33M-B	Year-round	Store at room temperature, away from light and dry	2 years after receipt of goods
	HJ33M-C	Year-round	Store at room temperature, away from light and dry	2 years after receipt of goods
	Catalyst	Year-round	Store at room temperature, away from light and dry	2 years after receipt of goods

Specifications

Item	Standard	Unit	Hardness
Item	Standard	Unit	60A	65A	70A	75A	80A	85A	90A	95A
HJ33M-A	-	g	100	100	100	100	100	100	100	100
HJ33M-B	-	g	224	184	144	124	104	84	69	56
HJ33M-C	-	g	7.25	9.05	10.85	11.75	12.65	13.55	14.20	14.80
Catalyst	-	‰	1~3	1~3	1~3	1~3	1~3	1~3	1~3	1~3
HJ33M-A temperature	-	℃	45-50
HJ33M-B temperature	-	℃	65-75
HJ33M-C temperature	-	℃	35-40
Die temperature	-	℃	100-110
Post-maturing conditions	-	h/℃	(12-24)/100 according to product size
Gel time	-	mins	7~10	7~10	7~10	5~7	5~7	3~5	3~5	3~5
Demoulding time	-	mins	40	40	40	30	30	30	30	30
Tensile strength	GB/T528-2009	Mpa	35-37	36-38	36-38	38-40	38-43	42-47	43-48	47-52
100% modulus	GB/T528-2009	Mpa	1—2	2—3	2—3	2—4	3—5	5—7	6—8	8—10
300% modulus	GB/T528-2009	Mpa	2—4	5—8	7—9	9—12	11—14	13—16	14—17	17—20
Elongation at break	GB/T528-2009	%	551-654	532-637	522-625	522-623	481-582	432-535	422-525	425-527
Tear strength	GB/T529-2008	KN/m	36-44	42-54	52-63	61-73	71-82	81-92	92-104	104-120
Rebound	GB/T1681-2009	%	51-52	50-52	50-52	49-51	48-50	45-47	43-45	41-43
Density (25 ℃)	GB/T533-2008	g/cm2	1.21	1.21	1.22	1.22	1.22	1.23	1.24	1.24
DIN drum wear	GB/T9867-2008	mm3	≤40	≤40	≤38	≤38	≤38	≤38	≤35	≤35

In recent years, our company has been very successful in ethics construction, eliminating possible loopholes in the work, which ensures that our Wholesale Factory Price Mdi Tdi Based-System Elastomer Casting Machine maintains ultra-high quality. We have excellent product performance and stable quality level. The correct business philosophy and correct business strategy have enabled the company to develop rapidly, and the company's total assets have steadily increased.

Hot Tags: quazi mdi three componment casting pu, China, manufacturers, factory, buy, PU SHEET, MDI Two Componment PTMEG Type Casting PU, Polyurethane Rubber Parts, PTMEG Based Casting Polyurethane Prepolymer, Quazi MDI Three Componment Casting PU, Cold Casting Polyurethane Prepolyer

[[ProKeywords]]

Mold and Make Custom Rubber Bond to Metal Parts

Zinc Borate (2335-400)